Memphis Repiping Prices — PEX & Copper Local Quotes
Cost guide and local estimates for repiping cost in Memphis, Tennessee.
Most homes in Memphis were built around 1970, meaning galvanized steel or cast iron pipes are likely running through your walls. These materials corrode over decades, leading to discolored water, low pressure, and eventual leaks that demand professional attention. Repiping replaces aging plumbing with modern materials like copper or PEX. With a 40% homeownership rate in Memphis, many residents face this decision alone. Understanding local costs and timelines helps you budget effectively and avoid emergency repairs that cost far more than planned replacement work.
Local data sourced from the U.S. Census Bureau (American Community Survey)
Repiping Cost in Memphis
| Job Type | Typical Cost Range in Memphis |
|---|---|
| Full-house repiping (PEX) | $4,000–$15,000 |
| Partial repipe | $2,000–$5,000 |
| Per linear foot (materials + labor) | $1.50–$4.00 |
Price estimates are for reference only and may vary based on scope of work, materials, and local market conditions.
What Affects Repiping Prices in Memphis?
- Home size and fixtures — Larger homes and more bathrooms mean more pipe runs and higher material and labor costs.
- Pipe material — Copper costs more than PEX. Material choice affects both upfront cost and long-term durability.
- Full vs. partial repipe — Full repipes are more expensive but may be necessary for older systems. Partial repipes target problem areas only.
- Access and complexity — Slab foundations, finished basements, and multi-story homes can add labor and complexity.
- Permits — Most repiping requires permits. Local permit fees and inspection requirements vary by jurisdiction.
When Should You Repipe Your Home?
With a median home age of around 56 years in Memphis, a significant share of local housing is entering the range where repiping becomes relevant. Watch for these signs:
- Pipes 50+ years old, or water discolored or low pressure throughout the house
- Multiple leaks in a short period
- Galvanized steel pipes (pre-1970) corrode from the inside—common candidates for replacement
- Polybutylene pipes (1978–1995) often fail and may be flagged by insurers
Tips for Getting Accurate Quotes
- Verify the plumber's license with Tennessee State Board for Licensing Contractors before hiring.
- Confirm whether the quote includes permit costs — many Tennessee jurisdictions require permits for major plumbing work.
- Ask if the service call or dispatch fee is credited toward the total if you proceed with the job.
Low pressure or discolored water throughout your home?
Get a repiping estimate from a licensed plumber in Memphis — PEX and copper options available.
📞 (844) 833-1077 — Available 24/7Related services cost in Memphis
Water Heater Replacement Cost in Memphis
| Job Type | Typical Cost Range in Memphis |
|---|---|
| Standard 40-gal tank replacement | $900–$1,800 installed |
| Large 80-gal tank replacement | $1,200–$2,500 installed |
| Tankless gas unit (installed) | $1,800–$4,000+ |
| Tankless electric unit (installed) | $1,500–$3,500 |
| Conversion from tank to tankless | Add $500–$1,500 for line/venting upgrades |
Sewer Line Replacement Cost in Memphis
| Job Type | Typical Cost Range in Memphis |
|---|---|
| Traditional excavation | $50–$150/linear foot |
| Pipe bursting (trenchless) | $100–$200/linear foot |
| CIPP lining | $80–$250/linear foot |
| Full job typical range | $3,000–$15,000+ |
| Complex/deep/long runs | $15,000–$25,000+ |
Drain Cleaning Cost in Memphis
| Job Type | Typical Cost Range in Memphis |
|---|---|
| Single bathroom drain (snake) | $100–$200 |
| Kitchen sink drain (snake) | $100–$225 |
| Main sewer line (snake) | $150–$350 |
| Main sewer line (hydro-jet) | $250–$600+ |
| Floor drain cleaning | $100–$250 |
| Bathtub/shower drain | $100–$200 |
| Roof vent cleaning | $150–$300 |
| Emergency/after-hours (any) | Add $75–$200 to standard rate |
Toilet Repair Cost in Memphis
| Job Type | Typical Cost Range in Memphis |
|---|---|
| Flapper replacement | $75–$150 |
| Fill valve replacement | $85–$175 |
| Wax ring replacement | $90–$200 |
| Running toilet repair (diagnosis + fix) | $100–$200 |
| Toilet handle/flush mechanism | $75–$150 |
| Cracked tank or bowl repair | $200–$400 (replacement often recommended) |
| Toilet unclogging (augering) | $100–$250 |
| Standard toilet replacement (unit + install) | $200–$500 |
| High-efficiency or comfort-height toilet install | $300–$700+ |
| Smart/bidet toilet installation | $500–$1,500+ |
Emergency Plumber Cost in Memphis
| Job Type | Typical Cost Range in Memphis |
|---|---|
| Burst pipe (emergency repair) | $500–$1,500 |
| Frozen pipe thawing | $200–$500 |
| Water heater failure (emergency replacement) | $900–$2,500 |
| Sewage backup (emergency clearing) | $300–$800 |
| Overflowing toilet (emergency) | $150–$400 |
| Gas line leak (emergency) | $300–$800+ |
| Flooding response + water extraction | $1,000–$5,000+ |
Price estimates are for reference only and may vary based on scope of work, materials, and local market conditions.
Cost Estimator for Memphis, Tennessee
Get an instant estimate for your plumbing project in Memphis. Adjust the options below to see how different factors affect the cost.
This is an estimate based on typical rates in Memphis, Tennessee. Actual costs may vary. We recommend getting quotes from multiple licensed plumbers.
Licensed Plumbers in Memphis, TN
Based on Google Maps ratings and reviews
| Name | Rating | Reviews |
|---|---|---|
| Conway Services | ★★★★★ | 8,001 |
| Smith's Plumbing, Heating & Air | ★★★★★ | 3,860 |
| Mr. Rooter Plumbing of Memphis | ★★★★★ | 1,563 |
| Traditional Plumbing | ★★★★★ | 924 |
| Premier Plumbing | ★★★★★ | 682 |
| Roto-Rooter Plumbing & Water Cleanup | ★★★★★ | 493 |
| Magnolia Plumbing Company | ★★★★★ | 408 |
| National Economy Plumbers | ★★★★★ | 133 |
Source: Google Maps · Data collected March 14, 2026
Repiping Costs Near Memphis, TN
Get a Free Quote from a Licensed Plumber in Memphis
Prices vary by job — get an accurate estimate for your specific situation.
📞 Call (844) 833-1077 — Available 24/7, including weekendsRepiping Cost FAQs – Memphis, Tennessee
- What does a full repiping job cost in Memphis?
- Full-house repiping in Memphis typically ranges from $4,000 to $15,000, depending on home size, pipe material chosen, and accessibility. Copper runs higher ($6,000–$18,000 for full homes) than PEX. Labor costs reflect local market rates and the complexity of your 1970s-era plumbing layout.
- How do I know if my Memphis home needs repiping now or can wait?
- Schedule a camera inspection if you notice discolored water, recurring leaks, or low pressure—common in Memphis homes with aging pipes. A licensed plumber can assess remaining pipe life and recommend timing. Don't wait if you see visible corrosion or experience multiple failures within a year.
- Why do Memphis plumbers often recommend PEX over copper for older homes?
- PEX is flexible, corrosion-resistant, and costs less to install in older Memphis homes where wall access is difficult. Copper is durable and resale-friendly but requires more labor in cramped 1970s construction. Your plumber will weigh budget, timeline, and long-term plans before recommending either.