How Much Does Drain Cleaning Cost in Irving, TX?
Cost guide and local estimates for drain cleaning cost in Irving, Texas.
The median home in Irving was built around 1985, which means most properties here rely on galvanized steel or early plastic drain lines—materials that corrode and crack over decades. As a result, drain cleaning in Irving often costs between $100 and $600 depending on whether plumbers are clearing a simple clog or tackling deeper line damage. With a 34.7% homeownership rate, many Irving residents face the choice between renting and owning, which shapes how they approach drain problems. Understanding local plumbing costs helps homeowners budget for both routine maintenance and unexpected repairs in Irving's aging housing stock.
Local data sourced from the U.S. Census Bureau (American Community Survey)
Drain Cleaning Cost in Irving
| Job Type | Typical Cost Range in Irving |
|---|---|
| Single bathroom drain (snake) | $100–$200 |
| Kitchen sink drain (snake) | $100–$225 |
| Main sewer line (snake) | $150–$350 |
| Main sewer line (hydro-jet) | $250–$600+ |
| Floor drain cleaning | $100–$250 |
| Bathtub/shower drain | $100–$200 |
| Roof vent cleaning | $150–$300 |
| Emergency/after-hours (any) | Add $75–$200 to standard rate |
Price estimates are for reference only and may vary based on scope of work, materials, and local market conditions.
What Affects Drain Cleaning Prices in Irving?
- Method: snaking vs. hydro-jetting — The most significant cost variable. Hydro-jetting is more thorough but costs 2–3x more than snaking. Many contractors will recommend snaking first and escalate to hydro-jetting if the clog persists or recurs.
- Clog location — Main line clogs are more expensive than individual fixture clogs. The further from the clean-out access point, the more labor involved. Roof vent clogs require ladder access and add time.
- Clog severity and cause — Grease buildup, tree root intrusion, and mineral scale are harder to clear than hair and soap. Root intrusion in particular often requires hydro-jetting plus a camera inspection to assess pipe damage.
- Emergency vs. scheduled service — After-hours, weekend, and holiday calls typically carry 1.5x–2x standard rates, plus an emergency dispatch fee of $100–$250. Scheduling during business hours is almost always cheaper.
- Access to the clean-out — If your home doesn't have an accessible clean-out port, the plumber may need to remove a toilet or access through a roof vent, adding labor cost. Installing a clean-out during a service call typically runs $200–$500 but pays off in future visits.
- Recurring clogs — If you're calling for the same drain repeatedly, the underlying cause likely hasn't been addressed. A camera inspection can identify root intrusion, pipe damage, or chronic buildup — and save you from paying for service calls that only temporarily fix the problem.
Tips for Getting Accurate Quotes
- Verify the plumber's license with Texas Department of Licensing and Regulation before hiring.
- Confirm whether the quote includes permit costs — many Texas jurisdictions require permits for major plumbing work.
- Ask if the service call or dispatch fee is credited toward the total if you proceed with the job.
Drain still clogged? Get a plumber on the line now.
Same-day drain cleaning available in Irving — snaking and hydro-jetting.
📞 (844) 833-1077 — Available 24/7Related services cost in Irving
Repiping Cost in Irving
| Job Type | Typical Cost Range in Irving |
|---|---|
| Full-house repiping (PEX) | $4,000–$15,000 |
| Partial repipe | $2,000–$5,000 |
| Per linear foot (materials + labor) | $1.50–$4.00 |
Water Heater Replacement Cost in Irving
| Job Type | Typical Cost Range in Irving |
|---|---|
| Standard 40-gal tank replacement | $900–$1,800 installed |
| Large 80-gal tank replacement | $1,200–$2,500 installed |
| Tankless gas unit (installed) | $1,800–$4,000+ |
| Tankless electric unit (installed) | $1,500–$3,500 |
| Conversion from tank to tankless | Add $500–$1,500 for line/venting upgrades |
Sewer Line Replacement Cost in Irving
| Job Type | Typical Cost Range in Irving |
|---|---|
| Traditional excavation | $50–$150/linear foot |
| Pipe bursting (trenchless) | $100–$200/linear foot |
| CIPP lining | $80–$250/linear foot |
| Full job typical range | $3,000–$15,000+ |
| Complex/deep/long runs | $15,000–$25,000+ |
Toilet Repair Cost in Irving
| Job Type | Typical Cost Range in Irving |
|---|---|
| Flapper replacement | $75–$150 |
| Fill valve replacement | $85–$175 |
| Wax ring replacement | $90–$200 |
| Running toilet repair (diagnosis + fix) | $100–$200 |
| Toilet handle/flush mechanism | $75–$150 |
| Cracked tank or bowl repair | $200–$400 (replacement often recommended) |
| Toilet unclogging (augering) | $100–$250 |
| Standard toilet replacement (unit + install) | $200–$500 |
| High-efficiency or comfort-height toilet install | $300–$700+ |
| Smart/bidet toilet installation | $500–$1,500+ |
Emergency Plumber Cost in Irving
| Job Type | Typical Cost Range in Irving |
|---|---|
| Burst pipe (emergency repair) | $500–$1,500 |
| Frozen pipe thawing | $200–$500 |
| Water heater failure (emergency replacement) | $900–$2,500 |
| Sewage backup (emergency clearing) | $300–$800 |
| Overflowing toilet (emergency) | $150–$400 |
| Gas line leak (emergency) | $300–$800+ |
| Flooding response + water extraction | $1,000–$5,000+ |
Price estimates are for reference only and may vary based on scope of work, materials, and local market conditions.
Cost Estimator for Irving, Texas
Get an instant estimate for your plumbing project in Irving. Adjust the options below to see how different factors affect the cost.
This is an estimate based on typical rates in Irving, Texas. Actual costs may vary. We recommend getting quotes from multiple licensed plumbers.
Licensed Plumbers in Irving, TX
Based on Google Maps ratings and reviews
| Name | Rating | Reviews |
|---|---|---|
| Roto-Rooter Plumbing & Water Cleanup | ★★★★★ | 1,485 |
| AAA AUGER Plumbing Services | ★★★★★ | 1,260 |
| RWD Services LLC | ★★★★★ | 117 |
| Just For You Plumbing and Heating | ★★★★★ | 53 |
| Ron's Irving Plumbing | ★★★★ | 33 |
| Plumber True Services of Irving, TX | ★★★★★ | 30 |
| Big Brother Plumbing Services | ★★★★★ | 29 |
| Premier Plumbing Solutions | ★★★★★ | 28 |
Source: Google Maps · Data collected March 14, 2026
Drain Cleaning Costs Near Irving, TX
- Carrollton, TX — 10 mi
Get a Free Quote from a Licensed Plumber in Irving
Prices vary by job — get an accurate estimate for your specific situation.
📞 Call (844) 833-1077 — Available 24/7, including weekendsDrain Cleaning Cost FAQs – Irving, Texas
- How much does drain cleaning typically cost in Irving?
- Basic drain clearing with a snake runs $100–$250 for most Irving homes. Kitchen and bathroom drains fall in the $100–$225 range, while main line cleaning costs $200–$500. Hydro jetting, which uses high-pressure water to scour pipes, ranges from $250–$600+. Emergency service calls add $75–$200 to these rates if you need help outside standard hours.
- Should I try clearing a drain myself, or call a professional in Irving?
- DIY plunging works for minor clogs, but Irving's older homes often have corroded pipes that worsen with aggressive snaking. Call a professional if water backs up repeatedly, drains slowly throughout the house, or you hear gurgling sounds. A camera inspection ($150–$400) identifies whether you're dealing with a simple blockage or pipe deterioration requiring repair.
- Why do older Irving homes need drain cleaning more often?
- Built around 1985, many Irving properties have galvanized steel drains that accumulate mineral buildup and rust inside. This narrows the pipe opening, trapping debris faster than newer plastic lines. Regular cleaning every 18–24 months prevents backups. If you're seeing recurring clogs, your pipes may be corroded enough to warrant a cleanout installation ($200–$500) or full replacement.